Lap times can be measured by using GPS of the phone. The time gap to the best lap is displayed while measuring it. If the sector is set, each sector's gap is displayed. Past lap times can be confirmed from the history screen.
The measurement using an external GPS receiver by Bluetooth is possible.
To cmmunicate with external GPS receiver, external GPS receiver should be able to send NMEA0183 RMC sentence with SPP(Serial Port Profile).
Log of the measurement data can be recorded by NMEA0183 RMC sentence (the measurement data acquired from the terminal is output as it is, log format might change depending on the specification of the terminal).
By using recorded log, the speed and the track line can be analysed.
Measurement track information can be made by using Google Maps. Two or more measurement sector can be installed in the made measurement track, and the measurement track can be set as a circuit or a section.
Measurement track information for major circuits is set beforehand.
Operability confirmed GPS Devices:
Qstarz BT-Q1000eX
Qstarz BT-Q818XT
的圈速可以通过使用手机的GPS测量。同时测量它显示的时间差距,以最佳圈速。如果该扇区被设定时,显示每个扇区的间隙。过去的单圈时间可以从历史记录屏幕进行确认。
通过蓝牙使用外部GPS接收器的测量是可能的。
要使用外置GPS接收器cmmunicate,外置GPS接收器应该能够发送NMEA0183 RMC句子SPP(串行端口配置文件)。
测量数据的记录可以通过NMEA0183 RMC句子被记录(从终端取得的测量数据是原样输出,日志格式可能取决于终端的规格发生变化)。
通过使用记录的日志,速度和轨道线路进行分析。
测试曲目信息可以通过使用谷歌地图进行。两个或更多个测量扇区可安装在制成测量轨道,并且测量轨道可以设置为一个电路或一个部分。
为主要电路测量轨道信息预先设定。
可操作性证实GPS设备:
Qstarz BT-Q1000eX
Qstarz BT-Q818XT